ST500LM030 Rosewood A5 made noise how to enter Terminal to see PreampType

[hvd]

Hello
I have a Seagate hard drive
ST500LM030 Rosewood A5 made the noise that it blocks BSY.
How do I enter Terminal to see PreampType ?

Terminal with looping message

Boot 0x80M
FAIL Servo Op=0100 Resp=0003

0100 0000 0000 0001 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
Response 1680 007C 0820 1400 0008 0000 0000 0000 0C2C 0000 0000 0000 0000 0000 0000 0B61 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0003 LOOP = 007F
Motor startedHeads loaded
FAIL Servo Op=00DF Resp=0007

00DF 0000 0001 0005 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
Responseframe 1E75 4677 0002 0002 0000 D4A5 0043 FFC3 0000 0001 0000 0000 0000 0000 0000 0B61 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 00022222222
FAIL Servo Op=0095 Resp=0007

0095 6A76 0004 7FFF 7FFF 7FFF 0000 0003 0000 0000 8000 0000 FFFF 0000 0000 0000 0000 0000 0000 0000 0000 61B0 6666 A000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
Responseframe 0002 0001 0002 4C77 0000 D4A5 0043 FFC3 0000 0001 0000 0000 0000 0000 0000 0B61 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 FFFF LOOP = 2247

FAIL Servo Op=0095 Resp=0007

0095 6A76 0004 7FFF 7FFF 7FFF 0000 0003 0000 0000 8000 0000 FFFF 0000 0000 0000 0000 0000 0000 0000 0000 61B0 6666 A000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
Response 0002 0001 0002 2DC9 0000 D4A5 0043 FFC3 0000,0001 0000 0000 0000 0000 0000 0B61 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 FFFF LOOP = 2247

FAIL Servo Op=0095 Resp=0007

0095 6A76 0004 7FFF 7FFF 7FFF 0000 0003 0000 0000 8000 0000 FFFF 0000 0000 0000 0000 0000 0000 0000 0000 61B0 6666 A000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
Responseframe 0002 0001 0002 57B2 0000 D4A5 0043 FFC3 0000 0001 0000 0000 0000 0000 0000 0B61 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 FFFF LOOP = 2247


Thank you for your help

[lcoughey]

Personally, I prefer to match the label on the heads themselves, which requires opening the drive. That said, if you want to send me the ROM file, I'll get the details for you.

[hvd]

Hello
I am beginner in data recovery field, I have PC-3000 Express, I want to know, how can we find PreampType on Rosewood families. I asked ACE but it has no solution yet.

Have you solution find PreampType on ROM file.

I attach the ROM file

Thank you for your help

[lcoughey]

Your ROM version is 82

[hvd]

Hello
Thanks
It is possible to give me the position of PreampType in the Rom file, I will not ask you every time.

Thanks Luke

[lcoughey]

The location is not consistant. Here is a screen grab of the RAP in your ROM showing where I found it.

rom-original-preamp.jpg (440.8 KiB) Viewed 2430 times

[hvd]

Hello

Yes, it is not specified. How do 82 02 become 82 E2?

ACE does not give me the answer, in my opinion we have to wait for ACE to find the solution for us.

[lcoughey]

82 is the only part that matters...the other is insignificant.

[hvd]

I tried to take an ST1000LM035 hard drive with PreampType C2 02

I look for position 000196E0 which it does not find C2

I send you the ROM and the photo
Thank you for your help

[lcoughey]

As I said, the location is not consistant.

ROM-2C-preamp.jpg (429.09 KiB) Viewed 2422 times