Platter Swap Without Alignment Issues

A place to post photos of data recovery disasters and to discuss unusual data recovery cases.
Post Reply
User avatar
ddrecovery
Official Data Recovery Lab Representative
Posts: 60
Joined: Thu Jun 27, 2019 5:13 pm

Re: Platter Swap Without Alignment Issues

Post by ddrecovery »

Hey

WD 2.5"
WD10SPCX - 24HWST1 (Big Bear) 2 platters, 4 heads
No alignment needed.
These drives have a lot of spindle motor failures (so no alignment helps with recovery).
Top
lcoughey
Site Admin
Posts: 980
Joined: Thu Jan 08, 2015 7:23 pm
Location: Ontario, Canada
Contact:
Contact lcoughey

Re: Platter Swap Without Alignment Issues

Post by lcoughey »

ddrecovery wrote: ↑Wed Jul 14, 2021 4:37 pm Hey

WD 2.5"
WD10SPCX - 24HWST1 (Big Bear) 2 platters, 4 heads
No alignment needed.
These drives have a lot of spindle motor failures (so no alignment helps with recovery).
Thanks, added to the list.
Top
Joe
Newbie
Posts: 2
Joined: Tue Aug 09, 2022 7:33 pm

Re: Platter Swap Without Alignment Issues

Post by Joe »

I can confirm that WD Helios WD10TMVW-11ZSMS4 (3 platters, 6 heads) does not have an alignment issue.
Last edited by Joe on Tue Aug 09, 2022 7:40 pm, edited 1 time in total.
Top
Joe
Newbie
Posts: 2
Joined: Tue Aug 09, 2022 7:33 pm

Re: Platter Swap Without Alignment Issues

Post by Joe »

I can confirm that Grenada ST3000DM001 (3 platters, 6 heads) does not have an alignment issue.
Top
Post Reply

Return to “Real Data Recovery Cases”