Seagate 2.5" Slim 2 platter

Discuss clean room tools made by Apex Tool Lab (http://www.apextoollab.com)
Post Reply
lcoughey
Site Admin
Posts: 966
Joined: Thu Jan 08, 2015 7:23 pm
Location: Ontario, Canada
Contact:

Seagate 2.5" Slim 2 platter

Post by lcoughey »

I used this tool today and discovered that the bottom was bent up a bit on only one tool, preventing the tool to slide under the bottom platter. A quick press down with a screwdriver and all is good. Not sure if it arrived that way or if I did it myself. Just take note that the metal is soft enough to bend...so, take care of the tools and possibly inspect before use.
Post Reply